LPK2M4B-KTC1，LPK2M4B-KTC1，LPB2M4B-KTC1，LPB2M4B-KTC1，LPD3M4B-KTC1，LPD3M4B-KTC1，LPF4M4B-KTC1，LPF4M4B-KTC1，
LPH4M4B-KTC1，LPH4M4B-KTC1，LPD4M4B-KTC1，LPD4M4B-KTC1，LPG4M4B-KTC1，LPG4M4B-KTC1，LPK5M4B-pTC3，LPK5MB-KTC3，
LPH5MB-PTC3，LPH5MB-KTC3，LPH5MB-KTC3，LPA3M4B-KTC1，LPA3M4B-KTC1，LPK3M4B-KTC1，LPK3M4B-KTC1，LPB4M4B-KTC1，
LPB4M4B-KTC1，LPE4M4B-PTC3，LPE4M4B-KTC3，LPG5M4B-PTC3，LPG5M4B-KTC3，LPH6M4B-PTC3，LPH6M4B-KTC3，LPK7M4B-PTC3，LPK7M4B-KTC3，LPH7M4B-PTC3， LPH7M4B-KTC3，LVH7MB-WTSK*，LPJ8MB-PTCB*，LPH8MB-PTCB*
•所有型号标配: 三功能阀,注射阀, 底阀, 进出口软管（标*的型号无三功能阀） •电源:220V*大功率:300W
•配五功能阀需单独订货
•PVC泵头可选，价格与PVDF泵头材质相同.
美国帕斯菲达pulsafeeder电磁计量泵LPK2MB-PTC1，加药泵流量调节方式：4-20mA+信号控制，泵头材质：PP
*手动:频率，冲程同时可调 *流量0.5-95升/小时，压力2-21Bar *自动：可选4-20mA4-20mA信号，液位信号接收功能 *21种机型
美国帕斯菲达pulsafeeder电磁计量泵LPK2MB-PTC1，加药泵流量调节方式：4-20mA+信号控制，泵头材质：PP
拆卸隔板
用水或其他合适的中和溶液使泵运行，冲洗泵头和阀门组件。如果化学药品滴落在泵上，则需冲洗泵的外部。将泵的行程长度旋钮设置为0%，然后拔去泵的插头。
使系统减压，然后断开泵的软管或管道。卸下泵头四颗螺钉，然后卸下泵头组件。
抓住隔板外缘，逆时针转动隔板，直到隔板从电子电源模块（EPM）上松开。不要松开隔板后面的偏转板或隔板垫片，重新装配时需要它们。注：垫片数量可以是0到2。
如果打算重复使用隔板，应检验隔板上的特氟纶表面有无过度拉伸迹象（局部白**域），或者隔板背面上的人造橡胶是否已磨损。如果这两种状况的数量过多，则应更换隔板。
6.3隔板更换
·更换隔板时，*好更换阀芯和其他磨损部件。供应商可提供部件包，包里有完全重新组装泵的湿端所需要的全部部件。供应商要知道的是泵的数据标签上的“KOPkit编号”，以便提供部件包。
·将泵的行程长度设置为50%，然后拔去泵的插头。
·如果用户保管好从原始隔板上拆下的垫片，或者知道原始数量，则可以跳过下一步隔板垫片调整。
PULSAtron Series E Plus Metering Pump
504 GPD @ 20 PSI, 230 VAC4-20 mA Input with Dual Manual Control and Stop Function Input
Stroke frequency control via 4-20 mA signal input, manual stroke length control. Stroke frequency is manually adjustable when in local control. Includes stop function input.
General Description
Pulsafeeder PULSAtron Series E Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset. The Series E Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via 4-20mA DC and stop function inputs. Auto-Off-Manual switch.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump - Key Features
- Manual Control by on-line adjustable stroke rate and stroke length.
- Highly Reliable timing circuit.
- Circuit Protection against voltage and current upsets.
- Panel Mounted Fuse.
- Solenoid Protection by thermal overload with auto-reset.
- Water Resistant, for outdoor and indoor applications.
- Indicator Lights, panel mounted.
- Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
- Few Moving Parts and Wall Mountable.
- Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
- Reliable metering performance.
- Rated "hot" for continuous duty.
- Leak-free, sealless, liquid end.
Includes:
A weighted foot valve/strainer assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 8' discharge tubing and Owners Manual
